Click image to view full size image
Made in China CE Approved Disc Used Wood Chipper / Wood
Chipper Shredder
> Introduction for [Rotex Master] Disc Wood Chipper
Disc cutting machine is a production of refined wood chips special equipment is widely used in textile, paper, pulp, wood-based panel industries in the production process of the preparation section. It is divided into flat spiral disc and two disc types, and there is material on the material under the model. The main raw materials are cutting path after peeling wood, bamboo, wood slab and fuelwood harvesting times more than materials. However, too rough (more than feed more than size) too small (30mm or less) too short (250mm below) too thin (5mm or less) and irregular raw material (non-decomposing stump, branches, etc.) do not fully function with the uniform cutting.
> Advantage for [Rotex Master] Disc Wood Chipper
(1) Firm and reasonable structure;
(2) Easy to install and maintenance;
(3) Convenient to operate and maintain;
(4) High production capacity;
(5) Final wood chip has fine quality;
(6) Length of the wood chips can be adjusted freely in the defined limits.
> Technical Parameter for [Rotex Master] Disc Wood Chipper
| Model | YMPJ-P15-80 | YMPJ-P35-160 | YMPJ-P45-250 |
| Way-in size(mm) | 150×150 | 350×350 | 450×450 |
| Speed(r/min) | 661 | 400 | 270 |
| Maximum diameter of raw material (mm) | 150 | 350 | 450 |
| Output(t/h) | 1-2 | 2-4 | 6-8 |
| Power(kw) | 37 | 55 | 90-110 |
| Weight(kg) | 1250 | 2700 | 5200 |
| Measurement(mm)CE Approved Disc Wood Chipper / Industrial Wood Chipper And Shredder |
 Sell
New Login
Company QR code Anytime Anywhere Mobile |